Moisture analyser ULTRA X 3081WQ

Price on request

ULTRA X 3081

The UX 3081 moisture analyser is a special instrument for measuring moisture in most liquid and solid substances and materials. The operating principle is that substances are dried and weighed at the same time. The weight loss is shown in %. In order to achieve reproducible results for light-weight and bulky materials, the UX 3081 was designed with an XXL drying tray for the relevant batch quantities.

The UX 3081WQ can be used to measure samples e.g. brass chips at up to around 360 °C. It is also possible to measure samples weighing up to 700 g and with a volume of 485 cm³.

A separate printer is available for the UX 3081/ UX 3081WQ.

All data and parameters including date and time are also output via the RS 232 interface in accordance with GLP.

 

Download PDF

 


 

Almost 70 years of experience with innovative technology forms the basis for the ULTRA X moisture analyser. Precision weighing technology, simple operation, good functionality and design and a robust structure are combined in a practice-oriented manner.

 


 

How can we help you?

Call us at +49 5232 97780 or send an e-mail to info@apinstruments.de

Category:

Operating instructions

Weigh the sample, pivot the radiator above it and switch it on, the measurement ends when the weight is constant. The parameters are set using three buttons in the menu. In addition to the moisture and solid material, additional measurement parameters can also be displayed.

The radiation temperature can also be set anywhere between up to 200 or rather 360 °C. The moisture content can be determined using a timer or the automatic cut-out. Three criteria are individually set for the automatic cut-out depending on the product properties. The measurement result remains on the display until the device is next used.

This device is specialy suitable for bulky substances or bulky substances resistant to high temperarures suche as brass chipps.

The reusable stainless steel sample dishes, size: 110 x 230 x 18 mm enable a higher weighing volume and mean ongoing cost savings.

ULTRA X 3081D moisture analyser
The ULTRA X 3081 can optionally be delivered with a separate printer. The printout of all data is carried out in line with GLP. Intermediate values can be printed out at selectable intervals as needed. All of the data are also output via the serial RS 232 interface and USB. The printer can be switched off.

Technical data

Balance
Weighing range: 400 g
Resolution: 0.001 g
Sample volume: max. 506 cm³
Drying bowl: 110 x 230 mm

For moisture measuring
Sample weight: any, minimum 1 g, recommended minimum 4 g
Power of heater: 400 watts
Automatic: automatic drying until weight constant selectable in 3 different modes: start measuring, measuring in intervals, weight loss / measured during intervals
Timer: 1 – 180 minutes
Temperature: selectable from 120 °C up to 360 °C
Measured values: % moisture, % dry mass, % moisture ad actual sample weight, g solids per kg
Measuring accuracy: 0.01%
Device identification: 4-digit ID for identifying the device
Menu lock: lock the menu to prevent accidental changes to drying parameters, cal function is further available

Communication
Data output: interface V24 / RS 232
Data signals: all weight and measuring data in GLP-format with start time and variable interval print out selectable date, time, total measuring time, type of sample

With Software ULTRA X DataChannel to transfer on PC as .xls file for Microsoft Excel, .html file, .xml file and .txt file.

For using
Power supply: 230 V 20% / + 15%
Supply frequency: 48-63 Hz
Power consump.: 800 VA
Dimensions: approx. l 385 x w 275 x h 420 mm over all
Weight: approx. 8.5 kg

Accessories

Stainless-steel drying tray | part no. 1000282
Sample tongs (2 sets supplied with the device)

Tray tongs | part no. 1000230
For lifting the tray (supplied with the device)

Power cable | part no. 1000190
Power supply (supplied with the device)

Calibration weight F1 200 g | part no. 1000403
For calibrating the balance

Aluminium foils 130 x 260 x 30µ | part no. 1000017
For lining the drying tray

Foil press | part no. 1000063
For shaping the aluminium foil

Consumables

Paper for printer 58 mm | part no. 1000234
For separate printer

Thermal paper
Durable 10 years, according to manufacturer

Ceramic heater (250 W) | part no. 1000139
Spare part

Ceramic heater (400 W) | part no. 1000138
Spare part

Applications

ULTRA X – instruments you will find in almost all fields!
Raw material exploitation – production – processing – storage – trade – research – recycling – monitoring

ULTRA X 3081

  • All light, voluminous materials
  • Wood industry
    Chips, wood fibers, pellets etc.
  • Agriculture
    Grasses, straw, hay, animal feed, silage
    Tobacco leaves, tea leaves etc.
  • Plastics industry
    Granules, powder etc. <= 1% moisture